Home How to AIO6 new updates – latest 2017.11.19 – 4G+ working once more
formats

AIO6 new updates – latest 2017.11.19 – 4G+ working once more

Update 2017.11.19: 4G+ working once more ! We have been tested for some time now the V1 with editable ICCID and today we have changed the V1 on the server to support the latest 4G+ unlock solution similar to the previous 4G+ solution. As before we can’t guarantee how long time this will be available so please take this into consideration if you plan to order big quantities of AIO6 and keep stock. We have tested it with 7, 7p, 6s, 6 and all models and sim cards working fine now (including NFC cards). So you can just update to V1 (no settings required) and you are done!

Update 2017.11.17: We have added a new version V10 to the update server. This version supports booth USIM and SIM cards (not CSIM/CDMA cards) and is specially designed for 6s and 6sp models. Unlock should be direct and complete. This version is only working on this models as far as we have tested. IMSI/ICCID/GID1/2 should be programmed as before (for example 310120  GID 2 A2 for Sprint). We will try to update today also V32 /34/35 to remove also the previous SIM Failure with some sim cards.

Update 2017.10.24: We have updated the AIO456 update software to V2.2. This version solves more AIO communication issues and includes an update network list with MVNO’s. It is in general better to use MVNO’s settings rather than default network settings (for Sprint for example). Password for Downloads section is the same: TakeMeToDownloads. Also, we have added V34 for AIO6 on our update servers. This version is similar in function with V32 but comes with what we think is a very important improvement. Algorithms for 3G and 4G are treated separately now so the stability should be much better than V32 at least in our test was better. This is still a USIM card update because SIM cards do not support 4G network authentication. We will try to expand this update to SIM also. We have been requested also to make a 2 in 1 (SIM + USIM) update but I am afraid that is technically not possible plus we are sure that mixing protocols in the same card will bring a lot of errors from the user’s point of view.

About V34 / V32:  supports only USIM cards. To force reset (if phone loses signal) you need to press *5005*7672*8#. If the phone does not automatically reset when 4G or 3G signal is found you can still call fast 112. This will force the phone to update the stored network authentication data. Most of the time calling 112 would not be required.

Using SIM cards with this update will result in Invalid SIM error.

If phone signal is not found this update will not auto enter unlock mode. You will need to press *5005*7672*7# to enter in unlock mode. Then you can activate the device and enable 4G if required. After activation you can retry to get valid singal with incomming calls by pressing *5005*7672*8#

Update 2017.10.19: We have updated the AIO456 update software to v2.1 (please download from Downloads section using password TakeMeToDownloads.
This update should solve many bugs our customers reported like can’t apply settings to AIO6 updates or failed updates. Also, this update has a working Read Simcard function (check Card tab). Using this function you can do a complete readout of a sim card and in case you have issues using it with AIO6 you can send this data to us to check.
Also as you already see there is a V6 update on the server already for few days. This is working ONLY for 4G or 2G sim cards. If you are using 3G sim cards or 3G enabled network then this update will mostly give you activation capabilities (no incoming calls).
We also plan to release soon a limited iPhone 6s,6sp, SE update.

Update 2017.10.12: Because we have been repeatedly asked to release faster we are releasing today another update V5 TMSI B1. This is still a beta update and tomorrow we will test it further with more sim cards and phones. So better please wait  until we have finished testing (this should happen in 1 days)

V5 – 4G TMSI B1
1. program AIO6 with the appropriate settings (usually IMSI, and sometimes ICCID and GID1/2)
2. insert into phone, phone will go to activation screen (is better if the phone is allready activated prior to this)
3. when you get full signal wait about 30 seconds (the card data will finish loading) – to get good and stable 4G signal you also try to call 112 and hang up 1-2 times. (4G MUST be enabled in the menu !) It might not work if you only get 3G signal. Make sure to disable WIFI also !
4. press *5005*7672*5# (this is the change mode to unlock mode command)
5. power off the phone
6. start the phone, and after restart phone should aquire 4G signal
7. if signal is lost you neeed to repeat the procedure from number 2. To go back to activation mode press *5005*7672*6# and restart the phone

In our tests for an iPhone 6 locked on Sprint the procedure was a little different:

1. insert into phone, wait for activation screen or press *5005*7672*6# and reinsert the card to go to activation screen;
2. wait 4G signal, press *5005*7672*5#
3. call 112, wait for call connecting (this is troublesome for countries in witch 112 calls directly to a service center)
4. remove the simcard and put back again;
5. now you can activate (press Next) and the phone will go to the main menu. No service will be displayed but in fact you can send and receive calls.

Update 2017.10.10:  We have uploaded V4 update for AIO6. Should be more stable than the previous V3. Also, we ask customers that complain cannot wite settings to V3 update to report if using V4 is working. Sprint phones are still not supported yet for V4 update. We also have a communication issue with Whatsapp. China has permanently blocked its use so please contact us by email and we will provide you with iMessage details (for iPhone users). Alternatively, you can ask us for WeChat (Chinese messenger ID and we can communicate using it). We are preparing the release of another update (TMSI update soon).

Update 2017.10.08: We have started to test the next update V3. This update is based on the concept of V7 update for AIO5 but we tried to make sure the phone will acquire 2G signal. This update will allow only 2G and if available EDGE data. For this, you will need to update your card to V3 and select the appropriate settings into the update software. To make it easier to find network data we have added a list of all known operators in the software. You can enter the downloads section using password “TakeMeToDownloads”

Update 2017.10.06: as you already know the activation servers have been patched so the 4G solution is not working anymore with AIO and other sim unlock products in the market.
Many customers asked us to add the AIO5 updates V7, 28, 32 as updates for AIO6. We will do this but we want first to check if there are other ways to unlock except the known methods. Unlike many cards in the market today AIO6 is still updatable and we promise our customers we will update them when we will have a good working update. Because there are so many customers contacting us these days is a little hard to reply to all of them so please have patience when contacting us. We can’t promise a deadline for the update or if will be more than old updates (2G and TIMSI) solutions. Anyway, I think you already know from AIO5 that we did keep our promise and updated AIO cards with the 4G+ update a few months ago so we will continue to do the same with AIO6 moving on.

 
 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn
9 Comments  comments 

9 Responses

  1. Jean

    So what happen next

  2. THoMZoNE

    Thanks for fast reply!

  3. Alex

    Any updates or results?

  4. RAPOSO

    i dont nknow how use the software, can you do a video?

  5. Alex

    Did you manage to make testing?

  6. Max

    Guys, could you, please, make a normal nano sim adapter. The size and depth of the slot is differ. It’s a great problem to insert the aio 6 and discover it by the program. Thank you.

  7. Inder Khatri

    How to unlock iPhone 7 Tracfone US with aoo sim??
    Any body know the IMSI Code of Tracfone?
    Thanks

  8. Hi somebody have working these software updates? How do you put the settings?

    Thanks for advance

Leave a Reply

Your email address will not be published. Required fields are marked *