Hi,
we have just released V24 AIO 5 firmware for testing purposes.
To update the firmware list press SHIFT button while the software loads or install the software again in a different directory, if you wish.
For Sprint USA the settings are IMSI:310120 GID2: 01, leave the MNC is 3 digit checkbox checked.
1. The best way is to have the phone closed at the begining
2. insert AIO + simcard
3. power on phone
4. wait until phone is activated message is displayed
5. wait for waiting for activation message
6. press Force 2G in iRose
7. now you need to wait for few minutes (No Signal should be displayed on the phone) until phone displays “iPhone is not activated” – then you press ignore
8. after this your phone should work in receiving calls and calling, no data will be available
For V23 the testing procedure is the following
1. phone is powered on
2. press Force 2G in iRose
3. insert card + AIO
4. wait until phone quires signal and you can go into the menu
5. press Force 2G again so you can receive calls
Good job, thanks!
hey admin ,please i want to test it my self,i have 10 geveys and 3 iphone s waiting
send me the software to my email.
V23 okay 🙂 Next time i try V24 😀 Good Job!
But! So we tested an AT T-mobile locked 5S 7.1:
– HU Vodafone: success (USIM)
– HU Telenor: sucess (USIM)
– HU Telekom: activation fail (USIM)
tomorrow we try with cutted sims… we hope to a miracle 🙂
Okay. So with old / new (USIM) Telecom sim card goe to Activation…
No! It’s working! Hurray! Only we need 3G solutions 😀
Anyway, no internet…
can you send it on my email the test version? viorelsimaria@yahoo.com thx
V24 is already released for everyone now
Iphone 5s Sprint 7.0.4 no luck Activation screen! what is problem?
What type of sim did you try? SIM or USIM?
I’m using old one i thing it’s SIM, it’s 3 years old it’s my test one working everytime 100%, i try different imsi and iRose no luck!
You need use only USIM! (factory maked nano sim)
No luck still Activation screen
on 7.1.1 is working, it’s show no service, and you can call, and reiceve calls, no sms, and no internet connection
I have a same problem! Please give solution for us! Thank you!
Did you tried V27 update ? Please try it.
Yes, i tried it. It had Invalid Sim message on Activation screen. (iOS 7.0.4 US Sprint, JailBreaked, 310120 GID2: 01-02)
And tried Sim (prepaid) and USIM (postpaid)
iPhone 5s AT&T what about 3G?
have too much problem
i make varicion v24 ATT
it,s activation and make sarching after that need activation
what i do ???
and but sprint first time is work good after that i chang sim
after i chang sim is not work all time need active
i try with 10pc sprint
all need active
what IOS you are using?
I have iphone 5s AT&T 7.1.1, i’m in Latvia Tele2 USIM/Sim is working perfect, EDGE SMS Call received, but Bite USIM/Sim no luck losing singnal all time, what can do?
Same problem with USIM vodafone romania
V27 is solving this problems at least with Vodafone Romania it did.
but with Digi.mobil Romania usim doesn’t work … what should i do? what setting should i make? i have one iphone 4s locked on Softbank Japan.
the ios is still 5.1.1 what should i do to work the usim and also the internet data ?
Hi , i updated 5c sprint to 7.1.1 ,now cant activate it , it says your phone has succesfully updated ,then should activate it but not activating with aio sim and sprint sim
when i insert sim+aio it jumps in activation required screen
All of u guys who’s getting activation screen is doing something wrong, i tested many networks and they all work, #1 the test software only works with 7.1 – 7.1.1 … # 2 do not place full imsi in software, select the imsi which is built into the software which is the 6 digits, the software will automatically complete the imsi, leave iccid how it is.. If necessary the software will Automatically placed it too, #3 do not put in any delay.. The software automatically will placed 25. Am just gonna help u guys with sprint 5c & 5s, most 5c & 5s sprint uses GID: 3, just select the imsi along with that GID: 3 with update 24 and all should be ok.. i have done many Sprint 5c & 5s
what about SMS it’s working?
SMS Only works with Straight gsm phones like at&t etc at this time
i try v24 IMSI:310120 GID2: 01 GID2: 02 GID2: 03
all this and not activated
any idea ??
is this details
[sett] input IMSI: 310120347359229
[sett] raw IMSI size:6 data:39 01 21 30 74 53 29 92
[sett] input ICCID: 89014103243473592290
[sett] raw ICCID size:0 data:98 10 14 30 42 43 37 95 22 09
[sett] raw GID1 size:0 data:FF FF FF FF FF FF FF
[sett] raw GID2 size:1 data:03 FF FF FF FF FF FF
[sett] raw forcesim = 01
[sett] raw delay = 25
[sett] raw speed = FF
[sett] raw mnclength = 03
???
You need to use 7.1.1 IOS
i use IOS 7.1.1
Please use the new V27 Sasha+ from test software and post results.
This will be available for all users in 1-2 days after we complete more tests.
Is it good only 5S /5C 7.1-7.1.1? Or good for older (7.0-7.0.6) versions?
good job ,thanks
mts belarus work it)
I have an iPhone 5c from Sprint. How I can unlock?
iphone 5c sprint LTE iOS 7.1.1 IS GOOD AND FAST
[info] description: V24 – AIO5 5S5C and Sprint 05.11 Use normal IMSI as you would use normally!
Sprint 5C/5S settings are IMSI:310120 GID2:00 leave MNC length is 3 checked by default, other settings default.9
[info] settings version: 1
[sett] Country: US
Network: Sprint LTE
IMSI: 310120
ICCID: No specific requirement
GID1: No specific requirement
Notes: iPhone 5 comaptible
[info] [COM3] checking …
[info] ATR size:15
[info] AIO 5 SN: 846DB328 detected
[info] AIO is in NORMAL mode
[sett] input IMSI: 310120347359229
[sett] raw IMSI size:6 data:39 01 21 30 74 53 29 92
[sett] input ICCID: 89014103243473592290
[sett] raw ICCID size:0 data:98 10 14 30 42 43 37 95 22 09
[sett] raw GID1 size:0 data:FF FF FF FF FF FF FF
[sett] raw GID2 size:1 data:01 FF FF FF FF FF FF
[sett] raw forcesim = 01
[sett] raw delay = 25
[sett] raw speed = FF
[sett] raw mnclength = 03
[info] AIO SN: 0x846DB328
[serv] 8 FREE updates remaining for your AIO5
[serv] update size 11660
[done] update complete.
[info] Writing settings V1
[sett] settings area size 29
[done] settings.